Miller Electric IH - Manual (Page 53)

OM-203 185 Page 49
7-2. Changing 5100V Recorder From Degrees F to Degrees C And Change TC Descriptor
scrn32
Log in as “Engineer” (see Section
6-2-2-2).
Press “Menu” (bottom right of
display).
Select “Config“.
Select “Channels” from pull down
menu.
scrn33
For each Channel Number (1-6):
1. Select “Channel Number”.
2. Maximum expected
temperature range reading:
1500 for ° F typ.
(1472 ° F) = 800 for ° C typ.
3. Range units can be changed
between 5F and 5C.
4. Descriptor can be changed in
“Descriptor” field, if desired.
Press “Apply”.
Log out.