MicroNet Technology MaxNAS - Manual (Page 8)

MaxNAS Owner’s Manual 8
3. Unpacking the MaxNAS
Please unpack your MaxNAS in a static free environment, carefully making sure not to
damage or discard any of the packing material. If the RAID subsystem appears damaged, or
if any items of the contents listed below are missing or damaged, please contact your dealer
or distributor immediately.
In the unlikely event you may need to return the MaxNAS for repair or upgrade, please use
the original packing material to ensure safe transport.
4. What’s Included
Your MaxNAS comes with the following items:
1 MaxNAS unit
5 Disk Drive Modules
1 Set of drive locking keys
1 MaxNAS Product CD
1 Quick Install Guide
1 power cord
2 Cat5e Gigabit Ethernet cable
5. Choosing a place for your MaxNAS
When selecting a place to set up your Disk Array, be sure to follow these guidelines:
• Place on a flat and stable surface capable of supporting at least 25lbs
• Place the Disk Array close enough to a network jack for the Ethernet cable to reach it.
• Use a grounded wall outlet.
• Avoid an electrical outlet controlled by wall switches or automatic timers. Accidental disruption
of the power source may wipe out data in the memory of your computer or Disk Array.
• Keep the entire system away from potential sources of electromagnetic interference, such
as loudspeakers, cordless telephones, etc.
• Avoid direct sunlight, excessive heat, moisture, or dust.
1-Getting Started