MicroNet Technology MaxNAS - Manual (Page 72)

MaxNAS Owner’s Manual 72
Appendix F: Product Specifications
System Architecture
CPU: Ultra Low Voltage Intel® 1.5GHz Celeron® M Processor
System RAM: 512MB DDR
NVRAM: On-board non volatile memory for firmware
Disk Interface: 5 channel SATA2-300 with NCQ drive controller
Network Interface: Dual Gigabit Ethernet host controllers
Expansion Ports: 3x USB 2.0 Type A Ports for external disk and printer hosting
1x eSATA port for external disk hosting
1x USB 2.0 Type B target port
System Displays: LCD Control Panel For basic configurations and status display
5 x LED (DOM, Network Activity x 2, USB Copy, System Busy)
5 x Disk status LED monitors
Disk Mechanisms: 5 hot swappable, 7200 RPM SATA2-300 NCQ enabled disk drives
Network Services
Dual Channel Gigabit Ethernet with multiple subnet support
Fixed/Dynamic IP Assignment
802.3ad based failover and link aggregation
Platforms supported:
Windows 98/ME/NT/2000/XP
Apple OS X
UNIX/Linux/BSD
Any web enabled platform via ftp or webdisk
Services Provided:
SMB/CIFS Common Internet File System
Apple File Protocol (AFP 3.1)
Network File System (NFS v3)
Microsoft NT Domain Controller (PDC) Integration
Microsoft Active Directory Authentication (AD) Integration
iSCSI Target supporting the following initiators:
Microsoft iSCSI Initiator v2.0.4
StarPort Initiator V3.5.2
MAC OS: globalSAN iSCSI initiator version 3.0 (1150)
Linux: open-iscsi 2.0-865
UPNP Universal Plug and Play for easy detection and configuration
Webdisk web storage support
FTP File Transfer Protocol
USB Storage Server
USB Print Server
Nsync Backup and Synchronization service
Disk Quotas per share
F-Product Specifications