Minolta CN3101e - Manual (Page 29)

4. Settings Required for Network Printing
20
4.3 Windows Printing Setting
The use of Windows Printing enables direct printing over the Microsoft network.
NOTE
To make the Windows Printing setting, it is necessary to install the NetBEUI
protocol in the PC.
Settings made on the controller side
Make the settings for Windows Printing from PageScope Light. The setting is
necessary for Windows Printing.
1. Start PageScope Light.
2. Enter the password to log on to the Administrator mode.
3. Click the “Network” tab and then select “Common Setting” – “Windows
Configuration.”
4. Make the following settings.
Enable Windows Printing Service:
Set the Windows print service.
Setting values : Enable, Disable
NetBIOS Name : Set the NetBIOS name.
Setting value : 15 alphanumeric characters or less
Printing Service Name : Set the print service name.
Setting value : 13 alphanumeric characters or less
WorkGroup Name : Set the work group name.
Setting value : 15 alphanumeric characters or less
4334P156CA