Motion CL900 FWS-001 - Manual (Page 39)

Chapter 2 Using your CL900 Using the cameras with Motion QuickNav 33
Stamping photos with geographical locations and time
You can add geographical information (geotags) or time stamps to your photos’ metadata
and to the photo itself.
You choose whether to add the stamps when you open the viewfinder to take photos. The
Stamp options are located on the bottom right of the viewfinder.
Stamp options
By default, a photo’s metadata includes the filename, file location, dimensions, exposure,
ISO speed rating and more. You enable Motion QuickNav to record geotags and time
stamps from the Camera Options menu.
To enable geotags and time stamps
1. Open the Motion QuickNav tool bar then tap the camera icon to open the
viewfinder.
2. Tap the Options icon located at the top of the viewfinder then tap the Picture
Info.
3. Under Geotagging, select Enable GeoTagging. If the GPS Com port displays a message,
“GPS device not yet detected,” press Detect to associate Motion QuickNav with the GPS
module.
4. Under Stamp, select the font size of the time stamp when displayed on a photo and the
time Stamp Format, tap either UTC or Local Time. UTC format displays the official
universal time independent of time zones and daylight savings.
add time stamp to photo metadata
add geotag to photo metadata
display stamp on photo