GE Industrial Solutions Digital Energy GT Series 1-3kVA - Tower Mount - Manual (Page 17)

OPM_GTU_TWR_1K0_3K0_XUS_V015 16 DE GT Series: User manual rev date 8-11- 04
Digital Energy ™ GT Series
g
4.4 SNMP Plug-in Card (optional)
SNMP (Simple Network Management Protocol) is the most popular protocol in the network. Via
NMS (Network Management Station) you can detect the status of all facilities in the network.
An SNMP Interface Card can be plugged into the built-in SNMP slot on rear panel of the UPS
(please refer to fig. 2-1). This optional interface unit can integrate the UPS into the network
allowing you to easily monitoring the UPS status.
NOTE: Once you install the SNMP card in the UPS, you cannot get any information from
the UPS via RS232. i.e. only either an SNMP card or the RS232 port can be used as a
communication interface!
The SNMP card also supports SHTTP protocol, you can use browser Microsoft IE or Netscape
Communicator to monitor or configure the UPS. Besides, the SNMP card supports Telnet and
FTP for remote monitoring and firmware upgrading.
Specifica tions:
1 - Auto detecting 10/100M Network speed.
2 - Supporting protocol: TCP/IP, UDP, HTTP, ICMP, ARP, TELNET, BOOTP, DHCP, FTP
and SNMPv1.
3 - Remote firmware upgradeable and configurable.
4 - Web server built-in, allow monitoring/controlling UPS via browser.
5 - VT100 terminal mode or Telnet to configure SNMP.
Functions:
1 - Schedule: Shutdown/Restart UPS, testing and control outlets.
2 - Testing: Scheduled testing of the battery can insure that the UPS will operate properly
during a utility power failure.
3 - Event log: Auto-record the power event.
4 - Historical records: Keep records of UPS status in specified interval.
5 - Event handling: configure special action for each power event to meet your requirements.
6 - On/Off UPS: set-up the power on/off timer.
7 - Outlet control: configure UPS outlets.