Garmin FA168CPS - Manual (Page 9)

– 9 –
About The Keypads (Continued) About The Keypads (Continued) About The Keypads (Continued) About The Keypads (Continued)
Fixed-Word Display Keypad
AWAY: All burglary zones, interior and
perimeter, are armed.
STAY: Perimeter burglary zones, such as
protected windows and doors, are
armed.
INSTANT: Entry delay is turned off:
Lit with STAY = Instant mode
Lit with AWAY = Maximum mode
BYPASS: This appears when one or more
burglary protection zones have been
bypassed.
ALARM
FIRE
AWAY
BYPASS
STAY
CHECK INSTANT CANCELED
NIGHT NO AC
NOT READY
CHIME BAT
PHONE TEST
FA260KP
ALARM
CHECK
NIGHT FIRE NOT READY
STAY
INSTANT
BYPASS
NO AC
CHIME
BAT
CANCELED
AWAY
FA215KP
FIXED-WORD DISPLAYS
NOT READY: Appears when burglary portion of the system is not ready for arming
(due to open protection zones). The system is ready to arm when this
message disappears and the READY indicator light comes on.
NO AC: Appears when AC power has been cut off. System is operating on
backup battery power.
AC: Appears when AC power is present.
CHIME: Appears when the CHIME feature is activated.
BAT: Low battery condition in a wireless sensor (if zone number displayed)
or low system battery (if no zone number displayed).
ALARM: Appears when an intrusion has been detected and the system is armed
(also appears during a fire alarm or audible emergency alarm).
Accompanied by the protection zone in alarm.
CHECK: Appears when a malfunction is discovered in the system at any time or
if an open is detected in a FIRE zone at any time or a fault in a
DAY/NIGHT burglary zone during a disarmed period. Accompanied by
a display of zone number in trouble.
FIRE : Appears when a fire alarm is present. Accompanied by a display of the
zone in alarm.
A FIRE display also appears when a fire alarm is manually activated,
accompanied by a display of emergency key zone number programmed
for fire.
NIGHT: Appears with “STAY” when the system is armed in Night-Stay mode
(perimeter burglary zones and pre-selected interior zones are armed).
CANCELED: Appears when an alarm has been canceled (see Exit Alarm section on
page 13 for more information on canceled alarms and displays).