Garmin FA168CPS - Manual (Page 34)

– 34 –
Acc Acc Acc Accessing Other Partitions essing Other Partitions essing Other Partitions essing Other Partitions (Continued) (Continued) (Continued) (Continued)
Common Zone Operation Common Zone Operation Common Zone Operation Common Zone Operation
Ask your installer if a
"common zone" was
assigned. If so, check
this box
Your system may have been set up to use a common zone, which is
an area shared by users of both partitions, such as a foyer or lobby.
If so, please note the following:
• The common zone will sound and report alarms only when both
partitions are armed. If only one partition is armed, the system
ignores faults on the common zone.
• Either partition may arm its system if the common zone is
faulted, but once armed, the other partition will not be able to
arm unless the common zone is first bypassed or the fault is
corrected.
• Faults on the common zone are displayed on common partition
keypads, and will also appear on another partition’s keypad when
the alternate partition is armed.
• Either partition can clear and restore the common zone after an
alarm.
• Entry/exit time for the common zone is the same as for partition 1.