Garmin FA168CPS - Manual (Page 14)

– 14 –
Checking For Open Zones Checking For Open Zones Checking For Open Zones Checking For Open Zones
Using the [ Using the [ Using the [ Using the [ ∗∗∗∗] Key ] Key ] Key ] Key
B efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed, otherwise the keypad will display a "Not Ready" message.
Use the READY key to display all faulted zones, making it easier for you to identify
and secure any open zone.
1. Press [
∗] (do not enter code first) to display faulted
zones .
2. Secure or bypass the zones displayed.
3. The keypad’s READY indicator lights when all
protection zones have been either closed or bypassed.
4. Arm the system as desired.
Alpha Display:
DISARMED
HIT ∗ FOR FAULTS
Fixed-Word Display:
Zone no. and “NOT READY”
Voice Status: Voice Keypads (if installed), can announce system status and faulted
zones (up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off: # + 0 + 2 + 4
(also turns on Voice Chime mode; see Chime mode section)
To announce Status: Press [#] FUNCTION + [0] VOICE + [ ∗] STATUS key.
(Announces current system status; e.g., “Disarmed Ready to
Arm.”)
To announce faults Press [#] FUNCTION + [0] VOICE + [
∗] STATUS + [∗] again.
and Status: (Announces up to three faulted zones with their zone
descriptors, if programmed.)