Gateway E-4650 - Manual (Page 57)

Setting the BIOS configuration jumper 49
Setting the BIOS configuration
jumper
The system board has a configuration jumper related to the BIOS. Place a
jumper on specific pins to reset the CMOS settings to the BIOS defaults or to
erase a misplaced or forgotten password. For more information on the location
and use of the configuration jumper, see “BIOS configuration jumper settings”
on page 103.
Caution Moving a jumper while the power is on can damage your
computer. Always turn off the computer and unplug the
power cord from the computer before changing jumper
settings.