Gateway E-4650 User Manual
Page 13
Gateway Mid-Tower back
5
Component
Icon
Description
Power connector
Plug the power cable into this connector.
Voltage selector switch
Before turning on the computer, make sure that the switch
is in the proper position for the correct power available.
In the United States, the utility power is supplied at a
nominal 115 volts at 60 Hz. The power supply is always
set to this when the computer is operating in the United
States. In other areas of the world, such as Europe, the
utility power is supplied at 230 volts at 50 Hz. If the
computer is operating in an environment such as this, the
voltage selector switch needs to be moved to 230.
Mouse port
Plug a Personal System/2
®
(PS/2) mouse into this port.
Keyboard port
Plug a PS/2 keyboard into this port.
USB 1.1 ports
Plug USB (Universal Serial Bus) devices (such as a USB
keyboard, scanner, or camera) into these ports.
Legacy support for USB keyboards and mice require that
they be plugged into a USB 1.1 port. Plug USB keyboards
or mice into the USB 1.1 ports.
Serial port
Plug a serial device (such as a digital camera) into this
port.
Parallel port
Plug a parallel device (such as a printer) into this port.
Network jack
Plug an Ethernet 10/100 network cable into this jack.
USB 2.0 ports
Plug USB (Universal Serial Bus) devices (such as a USB
keyboard, scanner, or camera) into these ports.
Legacy support for USB keyboards and mice require that
they be plugged into a USB 1.1 port. Plug USB keyboards
or mice into the USB 1.1 ports located on the back of the
computer.
Analog monitor port
Plug an external analog monitor into this port.
Digital monitor port
Plug an external digital monitor into this port.
TV out port
Plug a television into this port.