GE MULTILINK ML1200 User Manual
Page 288

17–18
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL
MISCELLANEOUS COMMANDS
CHAPTER 17: MISCELLANEOUS COMMANDS
The port mirroring commands are shown below. Refer to Chapter 9 - Port Mirroring and
Setup for additional details.
•
help port-mirror
•
prtmr
: enables/disables port mirroring functionality
•
setport
: defines the port mirroring ports
The port security commands are shown below. Refer to Chapter 6 - Securing Access for
additional details.
•
action
: sets the action type of secured port
•
allow
: allows MAC addressing per port
•
help port-security
•
learn
: enables/disables security for a single port or group of ports
•
ps
: enables/disables security in system
•
remove
: removes MAC addressing per port
•
signal
: sets the signal type of the secured port
The quality of service (QoS) commands are shown below. Refer to Chapter 14 - QoS
Overview for additional details.
•
help qos
•
setqos
: configures QOS configuration usage
•
set-untag
•
set-weight
: sets the port priority weights for all the ports in all the device
•
show-portweight
: displays the current port weight priority
The remote monitoring (RMON) commands are shown below. Refer to Chapter 16 -
Configuring RMON for additional details.
•
alarm
: sets the owner for the alarm group
•
event
: sets the owner for the event group
•
help rmon
•
history
: sets the owner for the history group
•
statistics
: sets the owner for the statistics group
The Rapid Spanning Tree Protocol (RSTP) commands are shown below. Refer to Chapter 13
- Rapid Spanning Tree Protocol for additional details.
•
cost
: sets the path cost of ports
•
forceversion
: set the force version of STP
•
help rstp
•
lll
•
port
: sets the RSTP administration status of ports
•
priority
: changes the priority of ports or bridge
•
rstp
: changes the RSTP administrative status of the bridge
•
show-forceversion
: shows the current force version of RSTP
•
show-mode
: shows the port mode status
•
show-timers
: shows the bridge time parameters
•
timers
: changes the bridge time parameters