GE MULTILINK ML1200 - Manual (Page 113)

CHAPTER 6: ACCESS CONSIDERATIONS ACCESS CONSIDERATIONS
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 6–7
Z Disable learning on required ports (for example, use the learn
port=3,5 disable command).
Z (Optional step) Add any specific MAC addresses, if needed, to allow
designated devices to access the network (use the
add
mac=00:c1:00:7f:ec:00 port=3,5 command).
Z Disable access to the network for unauthorized devices (Use action
port=3 depending on whether the port should
be disabled or the packed dropped. Follow that with a show port-
security command to verify the setting).
Z (Optional step) Set the notification to notify the management station
on security breach attempts (use the command
signal port to
make a log entry or send a trap).