Zug75 trim kit – GE Monogram ZIF36N RH User Manual
Page 40
Pub. No. 49-60055-3
Dwg. No. 197D2785P001
12-03 JR
65160-01
NOTE: While performing installations described in this book,
safety glasses or goggles should be worn.
For Monogram
®
local service in your area, call
1.800.444.1845.
NOTE:
Product improvement is a continuing endeavor
at General Electric. Therefore, materials, appearance
and specifications are subject to change without notice.
Step 11
Adjust
Door
Alignment
Check door alignment. The top of the door should be
parallel with the grille panel. If the door appears to be
too high or too low on the handle side, adjustments can
be made.
• Use a 5/16" wrench to turn the hinge.
• To raise the door, turn adjustable hinge pin towards
the right.
• To lower the door, turn hinge pin towards the left.
Bushing
Door Hinge
Case Hinge
5/16" Wrench
Raise
Pin Shoulder
ZUG75 Trim Kit
Unified 3/4" Custom Grille Panel Kit