Gateway WBR-100 - Manual (Page 52)

49
Advanced features
www.gateway.com
11
Close the PC Database window to return to the Advanced
Features/Configuration window.
Changing router options
To change router Options:
1
Click Options in the Advanced Configuration section. The Options window
opens.
2
In the Backup DNS section, type the backup DNS IP addresses (obtained
from your ISP) if the primary DNS is unavailable.
3
In the TFTP section, click the Enable Firmware Upgrade using TFTP check box.
If enabled, TFTP (Trivial FTP) can be used to upgrade the router firmware.
Instructions for using TFTP are included with the firmware file.
4
In the UPnP section, click the Enable UPnP Services check box. If enabled,
new equipment will be automatically detected and configured as it is
attached to your LAN. This is only supported by Windows Me, Windows
XP and later.
Checking the Allow Configuration check box lets you change the
configuration of devices that are automatically detected and configured.
Leaving it unchecked prevents this.