GCC Printers Elite XL - Manual (Page 18)

Setting up the Elite XL Chapter 1
1-4 Chapter 1
Installing or replacing a toner cartridge
The toner cartridge contains powdered ink, called toner, that the printer uses to form
images on paper. The cartridge also contains a light sensitive imaging drum that is
covered by a protective flap. Do not lift the flap when handling the cartridge.
Each toner cartridge box also includes a Cleaning Page that is used to clean the
printer’s fusing roller. Instructions for using the cleaning paper are detailed later in
this section.
Important toner cartridge reordering note: If you are using an 8 ppm Elite XL
model, use either part number AC15246 or AC15616 when reordering toner. If
you are using a 16 ppm Elite XL model, use only part number AC15616 when
reordering toner. (See page J-1 for ordering information.)
To install or replace a toner cartridge:
1. Close the multipurpose feeder.
See page 1-12 for information about the multipurpose feeder.
2. Open the printer access door.
Press the release button on the front of the printer and pull the access
door forward. If you are installing a cartridge for the first time, go to
step
G CC TECHNOLOGIES
Elite
XL
608
Release button
Printer access door