GCC Printers Elite XL - Manual (Page 175)

Appendix C Upgrading the printer’s memory
C-2 Appendix C
To install SIMMs:
1. Switch off the printer, unplug the AC power cord from the wall socket.
2. Unplug any interface cables from the back of the printer.
3. Extend the paper output tray extension.
4. Locate the controller board access panel.
The controller board access panel forms part of the paper output tray. It
looks slightly different on 8ppm and 16ppm printers.
8ppm access panel 16ppm access panel
8ppm printers
Open the first paper
output tray extension.
16ppm printers
Extend the paper output
tray to the A3 (fully
extended) position.