GCC Printers Elite XL - Manual (Page 157)

Chapter 7 Maintenance and troubleshooting
7-10 Chapter 7
Paper handling messages:
Tray 1 empty
The tray inserted into the printer’s standard paper tray slot is out of paper.
Tray 2 empty
The paper tray inserted into the optional second sheet feeder is out of paper.
Tray 3 empty (16ppm printers only)
The paper tray inserted into the optional third sheet feeder is out of paper.
Output tray full (message appears only on Elite XL 616)
The paper output tray needs to be emptied.
Load Tray 1, 2, 3
A job has been processed and is waiting to print.
Inserting the indicated paper size into the indicated paper tray will cause it
to print. Examples of are: Letter-S = Letter short-edge feed
and Letter-L = Letter long-edge feed
Manual feed
A job has been processed and is waiting to print. Insert paper into the
manual feed slot or multipurpose feeder and press the Manual Feed key.
Press manual feed
The Manual Feed key needs to be pressed in order for paper to be drawn
into the printer
Load MPFeeder
A job has been processed and is waiting to print. Inserting paper in the
multipurpose feeder will cause it to print.
Paper feed jam
The paper jammed while feeding.
Paper path jam
The paper jammed after feeding, but before exiting.
Paper exit jam
The paper jammed while exiting.