Genie Z-45 - Manual (Page 17)

Part No. 82600 Genie Z-45/25 & Genie Z-45/25J 15
Operator's Manual Second Edition · Second Printing
Check the Tire Pressure
Bodily injury hazard. An over-
inflated tire can explode, which can
result in death or serious injury.
Tip-over hazard. Do not use
temporary flat tire repair products.
This procedure does not need
to be performed on machines
equipped with foam-filled
tires.
To safeguard maximum stability, achieve
optimum machine handling and minimize tire
wear, it is essential to maintain proper pressure
in all air-filled tires.
1 Check each tire with an air pressure gauge and
add air as needed.
Tire specifications 2WD Models 4WD Models
Narrow base models
Industrial tire
Foam Filled Only
Standard base models
Rough terrain tire
45 psi / 3.1 bar 45 psi / 3.1 bar
Tire size: 14-17.5 NHS
Standard base models
Industrial tire
100 psi / 6.9 bar
Tire size: 9-14.5 LT
Standard base models
Rough terrain tire
50 psi / 3.5 bar 50 psi / 3.5 bar
Tire size: 355/55D625 14 ply
MAINTENANCE
Scheduled Maintenance
Maintenance performed quarterly, annually and
every two years must be completed by a person
trained and qualified to perform maintenance on this
machine according to the procedures found in the
service manual for this machine.
Machines that have been out of service for more
than three months must receive the quarterly
inspection before they are put back into service.