Garmin Rino 130 - Manual (Page 94)

80
Features
Position Format - Allows you to choose from different grid formats. The default position for-
mat, ‘hddd°mm.mmm’ displays the latitude and longitude in degrees and minutes and is most
commonly used. The following additional formats are available:
hddd.ddddd° - latitude/longitude in decimal degrees; hddd°mm.mmm’ - latitude/longitude in
decimal numbers; hddd°mm’ss.s” - latitude/longitude in degrees, minutes, seconds; British Grid;
Dutch Grid; EOV Hungarian Grid; Finnish Grid; German Grid; Icelandic Grid; India Zones;
Irish Grids; Loran TD; Maidenhead; MGRS; New Zealand; QNG Grid; RT90; South African Grid;
Swedish Grid; Swiss Grid; Taiwan Grid; US National Grid; UTM/UpS - Universal Transverse
Mercator / Universal Polar Stereographic grids; W Malayan RSO; and User UTM Grid.
LORAN TD Format
When creating new waypoints using LORAN TD coordinates, you must set the cor-
rect LORAN chain number and secondary stations in the Setup TD field before storing the
waypoint. After the waypoint is stored in unit memory, it always references the LORAN chain
number and secondary stations currently selected in the Setup TD field. If you enter a different
LORAN chain number, change the secondary stations, or offsets in the Setup TD field, the ac-
tive waypoint information reflects those changes. Because the unit does not rely on the LORAN
signal for navigation, it can reference a different GRI chain and/or secondary stations and still
navigate to the location stored in memory.
To adjust the Loran TD settings, select ‘Loran TD’ as the Position Format to open the Loran
TD setup window. To change the settings of any fields, highlight the field, press the THUMB
STICK IN. When done, highlight ‘Save’ and press IN.
For more information on Loran TDs, you may download Garmin’s Loran TD Position Format
Handbook from the Garmin web site at http://www.Garmin.com/support/userManual.html.
Setup Page
LORAN TD Page
in the Units Setup
Page