Reference, Radio page – Garmin Rino 130 User Manual

Page 33

Reference

The Rino 130 can manage up to 50 contacts at any time. Each time that you receive a signal

from a contact, your map is updated showing their new position. A Track Log of their move-
ment is created and shown on your map (see the Track Logs section). After a contact has been
established, a “ Updated” message brieﬂy appears at the bottom of your display
each time the contact updates.

All contacts are listed on a Contact List Page and also displayed in the Contact Bar on the

Map Page (see the Map Page section). Contacts behave like waypoints and count towards the
500 maximum waypoint total. If the contact did not have a GPS location on the last transmis-
sion, a ? mark appears below the ﬂag. To view the contact details (such as Direction, Elevation,
Timestamp, Location, and Notes that have up to 30 characters), highlight the details ﬁeld and
press LEFT or RIGHT on the

THUMB STICK

to change to the next data ﬁeld.

To accept a new contact:

1. When a new contact is received, the New Contact page automatically appears.
2. Highlight ‘OK’ and press the

THUMB STICK

IN. If you do not select OK, the contact is not

saved.

To review a contact and contact details:

1. From the Map Page, highlight the desired contact of the Contact Bar and press the

THUMB

STICK

IN. As you highlight the contacts on the Contact Bar, the Map page centers the map

on that contact and display its name, direction and distance near the top of the screen.

Or
1. Press the

THUMB STICK

IN and hold it until the Shortcuts Menu is displayed. Highlight

‘Find ‘N Go’ and press the

THUMB STICK

IN.

2. Highlight ‘Contacts’ and press the

THUMB STICK

IN.

3. From the Contacts List, select the desired contact and press the

THUMB STICK

IN.

Radio Page

Contacts also show on the Map

Page. Highlight the contact and

the map centers on their last

position.

Contact Bar

Press LEFT or RIGHT on

the THUMB STICK to

view different contact data.