Garmin Rino 130 - Manual (Page 40)

26
Reference
Map Page
Programming the Data Fields
Select ‘Show... Data Fields’ to view four optional Data Fields on the right side of the screen
that can be programmed to provide a variety of travel and navigation information. A list of the
choices is shown below. Not all data types are available on every page.
To program a data field:
1. Use the THUMB STICK to highlight the data field and then press IN to display the list of
data options.
2. Highlight the desired option and then press the THUMB STICK IN to change the data field
type.
Data Field Options
Thee data field options apply to the Map Page data fields and the Trip Computer data fields.
For definitions of these all data fields used in the Rino 130, refer to the Appendix.
Changing Data Fields.
Bearing
Course
Current Destination
Current Distance
Current ETA
Current ETE
Elevation
Final Destination
Final Distance
Final ETA
Final ETE
GPS Accuracy Heading
Maximum Speed
Moving Avg. Speed
Odometer
Off Course
Overall Avg. Speed
Pointer
Speed
Sunrise
Sunset
Time of Day
To Course Trip Odometer
Trip Time - Moving
Trip Time - Stopped
Trip Time - Total
Turn
Velocity Made Good
Vertical Speed
Trip Computer Only:
Location (lat/lon)
Location (selected)