Calibrating the altimeter, Programming data fields, Calibrating the altimeter programming data fields – Garmin Rino 130 User Manual
Page 53: Reference altimeter page
39
Reference
Altimeter Page
Calibrating the Altimeter
Because the Rino 130 relies on the Barometric pressure to determine the elevation and the
pressure at any given elevation can fluctuate, you can calibrate the altimeter to increase its ac-
curacy. You must know the elevation or pressure at your current location, information you can
obtain from a map or other reliable source.
To manually calibrate the altimeter:
1. Use the
THUMB STICK
to access the Option Menu.
2. Highlight the ‘Calibrate Altimeter’ option and press the
THUMB STICK
to display the
Calibration Page.
3. At the message asking “Do You Know The Correct Elevation?” highlight the on-screen ‘Yes’
button and press the
THUMB STICK
IN to enter your elevation. When finished, highlight
‘OK’ and press it IN to return to the Altimeter Page.
Or At the message asking “Do You Know The Correct Pressure?” highlight the on-screen ‘Yes’
button and press the
THUMB STICK
IN to enter your elevation. When finished, highlight
‘OK’ and press it IN to return to the Altimeter Page.
Programming Data Fields
The two user-selectable data fields support this page and can be programmed to display the
data options listed to the right.
To program a data field:
1. Use the
THUMB STICK
to highlight the desired data field and then press it IN to open the
data field option pop-up window.
2. Use the
THUMB STICK
to move UP or DOWN the menu to highlight a desired data option
and then press IN to place it in the data field.
Altimeter Data Field Options:
For definitions refer to the
Appendix.
Ambient Pressure
Average Ascent
Average Descent
Barometer
Elevation
Maximum Ascent
Maximum Descent
Maximum Elevation
Minimum Elevation
Total Ascent
Total Descent
Vertical Speed