Garmin Rino 130 - Manual (Page 76)

62
Features
Goto
Activating a Goto
Viewing a Goto on the
Map Page
USING A GOTO
The Goto function allows you to create a direct route to a destination, (waypoint, city, or
point of interest). Once you have accessed the Information Page for an item, use the ‘Goto’
button at the bottom of the page to initiate travel, using the Map and Navigation Pages for
guidance.
To activate a Goto:
1. Use the Find ‘N Go Menu to access the Information Page for any desired destination and
use the THUMB STICK to highlight the Goto button.
2. Press the THUMB STICK IN to start navigation.
3. Observe the Navigation Page, it displays the name of your destination, the distance from
your current location, and a Bearing Pointer indicating the direction you should travel. The
time required to reach your destination displays when you begin to travel and establish a
predicted rate of movement. The Data Fields to the right of the page display information
relative to your travel.
4. Use the PAGE button or Main Page Menu to access the Map Page and observe your
movements and a dark line indicating the direct path from your current location to your
destination.
5. Use the Bearing Pointer on the Navigation Page to maintain travel in the right direction and
observe distance and time information to monitor your progress.
6. When you are close to your destination, an “Arriving at Destination” message appears. If
you move past the destination the Bearing Pointer reverses and the distance increases.
To stop navigation, select the on-screen Option Menu button at the top of the
Navigation or Map Page. Select ‘Stop Navigation’, then press the THUMB STICK IN.