Garmin Rino 130 - Manual (Page 19)

5
Radio Page
Radio Page
RADIO PAGE OVERVIEW
The Radio Page is the first of the default Main Pages. This page provides the user interface
for FRS (Family Radio Service) and GMRS (General Mobile Radio Service) radio operations.
Garmin Rino units work with 3rd party FRS/GMRS radios, provided the other radios use stan-
dard FRS/GMRS frequencies. To take full advantage of the Rino features, communicate with
other Rino users.
The Radio Page also provides access to the Weather Radio, which provides a constant
update of current weather conditions. The Weather Alert feature further enhances the Weather
Radio by automatically notifying you of any weather alerts, even when the Weather Radio is not
is use and the FRS/GMRS radio is in use! These features are helpful while outdoors or planning
a road trip. Also use this page to control and setup the radio, view current settings and see
informational graphics of the unit’s operation.
Initializing the Rino 130
To take full advantage of all of the Rino 130 features, the GPS receiver must be initialized.
The initialization process allows the Rino 130 to receive and store satellite information, and
begin using the satellites for navigation. Initialization is automatic, should only take a few
minutes, and only needs to be done the first time the unit is used.
To initialize the unit:
1. Take the Rino 130 outside where it has an unobstructed view of the sky and turn it on.
2. The unit begins to search for satellite signals. “Tracking Satellites” is displayed while the
unit is initializing.
3. Initialization should take no more than five minutes. When the GPS is initialized and ready
for navigation, the message “3D Accuracy” is displayed on the Radio Page.
Reference