Adding or editing from the route map, Features routes page – Garmin Rino 130 User Manual

Page 81

Features

Routes Page

Adding or Editing from the Route Map Page

You can use the panning arrow with the Route Map Page displayed to add or edit route

waypoints.

To add a point at either end of a route:

1. Select the Route from the Routes List. Press the

THUMB STICK

IN to display the Route

Page.

2. Highlight the on-screen ‘Map’ button at the bottom of the page and press the

THUMB

STICK

IN to display the Route Map Page.

3. Use the

THUMB STICK

to move the panning arrow to either end of the displayed route

until the end point is highlighted. Then press the

THUMB STICK

IN and select ‘Add Turns’.

This option appears only when highlighting the end point of a route.

4. Move the panning arrow to a map item or location where you would like to extend the

route and press the

THUMB STICK

IN to display the Information Page for the new point.

5. Press the on-screen ‘Use’ button to return to the map page and then press the

THUMB

STICK

IN again to place the new waypoint.

To add a route point within a route:

1. Follow steps 1 and 2 in the previous instruction.
2. Use the

THUMB STICK

to move the panning arrow to a route line. When the arrow

touches the line, the line becomes thin. Press the

THUMB STICK

IN to display the word

‘ADD’ next to the line.

3. Drag the line to a map item or other location where you want to establish a new waypoint

and then press the

THUMB STICK

IN to place the new waypoint. A waypoint information

page displays. Press the on-screen ‘OK’ button to save the new waypoint, then press it
again after returning to the Route Map.