Stovax PR0741 - Manual (Page 5)

5. CLEanIng THE E-STUdIo
MAKE SURE ThE FIRE AND SURROUND ARE COOL BEFORE
TRyING TO CLEAN.
5.1 Remove the glass window by unscrewing the four screws in
the retaining bracket, Diagram 2.
2
AR1767
E-STUDIO
5.2 To clean the glass surface, Gazco recommends you use a
ceramic glass product generally sold for cleaning ceramic
hobs.
5.3 Remove the granite chippings and place on a dry clean
surface. Do not remove the enamel back panel.
Use a damp cloth and mild non abrasive cleaner on the
enamel back panel.
5.4 Clean the burner and tray assembly using a vacuum cleaner
with a soft brush attachment. Ensure all debris is removed
from the burner ports.
5.5 Replace the granite chippings by referring to Section 7 for
E-Studio.
6. CLEanIng THE LogIC-E Box
MAKE SURE ThE FIRE AND SURROUND ARE COOL BEFORE
TRyING TO CLEAN.
6.1 Remove the glass window by unscrewing the four screws in
the retaining bracket, Diagram 3.
6.2 To clean the glass surface, Gazco recommends you use a
ceramic glass product generally sold for cleaning ceramic
hobs.
3
AR1377
LOGIC E-BOX
6.3 Remove the ceramic coals and place on a dry, clean
surface. Remove the fuel bed and burner cover gasket.
6.4 Clean the burner and tray assembly using a vacuum cleaner
with a soft brush attachment, Ensure all debris is removed
from the burner ports.
6.5 Replace the ceramics by referring to Section 8 for the Logic
E-Box arrangement of components.
7. E-STUdIo
ARRANGEMENT OF FUEL BED
COMPONENTS
ONLy USE ThE CORRECT TyPE AND QUANTITy OF GRANITE
ChIPPINGS. ALwAyS FOLLOw ThE FUEL BED LAyOUT AS
STATED IN ThESE INSTRUCTIONS. NEvER ChANGE ThE
LAyOUT FROM ThAT ShOwN hERE.
7.1 Arrange the granite chippings in the areas highlighted in
Diagram 4. Granite chippings should be evenly distributed.
4
AR1768
5
USER INSTRUCTIONS