Stovax PR0741 - Manual (Page 22)

Pebble Layout
9.12 Position the pebble flame baffle centrally on the tray and
ensure the stepped lower edge engages against the rear
edge of the burner skin, Diagram 30
30
AR1406
9.13 Place the front pebble piece centrally in the channel at the
front of the tray, Diagram 31.
31
AR1407
9.14 Place the four pebbles as identified resting between the
front ceramic and the flame baffle as shown in diagram 32.
32
AR1408 A4 A5 A6 A3
9.15 Place the next four pebbles as identified resting between
the flame baffle and the first row of pebbles as shown in
diagram 33.
33
AR1409
A1 A2 A1
9.16 Place the remaining two pebbles identified as shown in
diagram 34.
34
AR1410
A3
A3
9.17 The coals/pebbles should evenly cover the whole bed with
the gaps between them kept equal. This will maximise the
performance of the product
9.18 ENSURE THAT THE COALS/PEBBLES ARE POSITIONED
AS ABOVE. ONLY USE THE CORRECT AMOUNT OF
COALS/PEBBLES AS SPECIFIED IN THE DIAGRAMS.
9.19 Ensure that the fibre glass window seal on the box is intact,
then lower the glass window into the hooks on the box.
Secure the window using four screws in the retaining
bracket. See diagram 35.
35
AR1377
AR1380
NEvER OPERATE ThE FIRE whEN ThE GLASS
PANEL IS REMOvED OR BROKEN
INSTALLATION INSTRUCTIONS
INSTALLATION
22