Stovax PR0741 - Manual (Page 10)

10. oxygEn dEPLETIon SEnSor
The fire is fitted with an oxygen sensitive pilot system that
will act to cut off the gas supply to the fire should the
oxygen in the room fall below its normal level. If the fire is
turned off by this device, it usually indicates that there is a
problem with the flue system, and this should be inspected
by a qualified engineer. Do not attempt to use the fire until
an engineer says it is safe to do so.
This device is not a substitute for an independently
mounted carbon monoxide detector.
11. FLAME FAILURE DEvICE
This is a safety feature incorporated in all GAZCO fires
which automatically switches off the gas supply if the pilot
light goes out and fails to heat the thermocouple.
12. RUNNING IN
The surface coating on the coals used in your GAZCO fire
will burn off during the first few hours of use, producing a
harmless and temporary odour. This will disappear after a
short period of use. If the odour persists, ask your installer
for advice.
13. SERvICING
The fire must be serviced every 12 months by a qualified
Gas Engineer. In all correspondence, always quote the fire
type and serial number, which may be found on the data
badge located on chain beneath the control valve.
14. vENTILATION
Any purpose provided ventilation should be checked
periodically to ensure that it is free from obstruction.
15. INSTALLATION DETAILS
To assist in any future correspondence, your installer should
have completed the commissioning sheet at the front of this
manual. In all correspondence always quote the Model
Number and Serial Number.
10
USER INSTRUCTIONS