GE SG SERIES 20 - Manual (Page 25)

g
GE
OPM_SGS_USM_10K_40K_0US_V010.doc 25/88 Operating Manual SG Series 10, 20, 30 & 40 kVA
Load on phases screen 2
This screen displays for each phase:
•
The Load active power (kW) (for RPA: total value of Parallel System).
•
The Load apparent power (kVA) (for RPA: total value of Parallel System).
LOAD ON PHASES
L1= 6.72kW 8.40kVA
L2= 5.84kW 7.30kVA
L3= 6.08kW 7.60kVA
metering
alarms
parameters
+
–
ok
Mi scellaneous screen
This screen displays:
•
The temperature of the Inverter Bridge.
•
The total operating time for the UPS (in hours).
•
The total operating time for the Inverter (in hours).
MISCELLANEOUS
InvHeatsink = 45 ° C
UpsOperTime= 3125h
InvOperTime = 2135h
metering
alarms
parameters
+
–
ok
Utility Faults Statistics screen
This screen displays:
•
The total number of minor Utility faults (Bypass Utility out of tolerance faults).
•
The total number of major Utility faults (Rectifier Utility out of tolerance faults).
•
The total number of detected output overloads.
UTILITY FAULTS STAT.
Minor =
43210
Major = 11267
Overloads= 654
metering
alarms
parameters
+
–
ok
UPS identification screen
This screen displays:
•
The UPS family and the power range.
•
The software version.
•
The serial number.
UPS IDENTIFICATION
SG Series S0 30kVA
SW Version: x.xx
S/N: P0030-2003-0001
metering
alarms
parameters
+
–
ok