Gateway 600YG2 User Manual
Page 99
94
Replacing Gateway 600YG2 Components
www.gateway.com
30
Install the processor onto the new system board making sure that Pin 1
on the processor (indicated by the silk-screened arrow on the corner of the
processor) aligns with Pin 1 on the processor socket (indicated by the
absence of a pin hole in the processor socket), then lock the processor in
place by using a flat-blade screwdriver to turn the processor lock screw
¼-turn clockwise.
31
Place the new system board onto the notebook.
32
Slide the battery cover door closed.
33
Reinstall the audio board by following the instructions in
.
Pin 1
Pin 1