Gateway SZSL95IN0XXXXXXXX - Manual (Page 47)

www.gateway.com
41
Installing a printer, scanner, or other device
Your computer has IEEE 1394 (Firewire
®
) and USB ports. Use
these ports to connect peripheral devices such as printers,
scanners, and digital cameras to your computer. For more
information about port locations, see
“Checking out your
computer” on page 6 .
IEEE 1394 and USB ports support plug-and-play and
hot-swapping, which means that your computer will usually
recognize such a device whenever you plug it into the
appropriate port. When you use an IEEE 1394 or USB device for
the first time, your computer will prompt you to install any
software the device needs. After doing this, you can disconnect
and reconnect the device at any time.
Connecting the dial-up modem
The dial-up modem USB dongle is an optional accessory.
To connect the dial-up modem:
1 Plug a modem cable into the modem jack on the modem
dongle and into a telephone wall jack.
2 Plug the modem dongle into an available USB port on
your computer or the power module.
Important
Before you install a printer, scanner, or other peripheral device, see the
device documentation and installation instructions.
Help
For more information about installing peripheral devices, click Start, then
click Help and Support. Type installing devices in the Search box, then
press E NTER .
Component Description
Modem jack Plug a modem cable into this jack.
USB plug Plug this into any available USB port on your
computer or the power module.
Modem jack USB plug
8512740.book Page 41 Thursday, September 27, 2007 2:43 PM