Fostex VF160EX - Manual (Page 33)

33
Preparing to Record
RECORDING to 2 Tracks
With track 1 now recorded, we will record the stereo sound source to tracks 15 and 16 of the recorder.
Press the [EXIT/NO] key.
[CH STATUS/CH SEL] key of ch 15 and 16 -> GREEN/RED:
Alternately Flash
* Indicates that trk15 and 16 are “
RDY (Ready)”.
Press the [RECORD] key to put trk15 and 16 in the Input
Monitor mode (RED: Flashing).
Trk15 and 16 will got to the Input Monitor mode.
ACCESS
PHANTOM
INPUT SEL SOURCE
REC ASSIGN
BUSS DIRECT REC TRK REC TRK
AUTO RTN
AUTO PUNCH START IN OUT END IN ALIGN SEL OUT
DISP SEL PGM SEL SETUP
INT MIXDOWN
A RTN A PLAY
SCENE SEQ.
TIME BASE
CLIPBOARD
MARK
1 2 3 4 5 6 7
HOLD/ STORE EDIT UNDO /REDO VARI PITCH LOCATE SCRUB
P.EDIT EVT MEM
F FWD REWIND PLAY STOP RECORD
CLIPBOARD PLAY LOCATE ABS 0
LOCATE REC END
PREV NEXT
JOG
SHUTTLE
AUTO PUNCH
EXIT/NO
EJECT
ENTER/YES
FADER ADJUST
LEVEL ADJUST
SHIFT
CH PARAM EDIT
CH VIEW FADER
TRACK
LO-G PAN
PRE/POST
MID-G/F/Q AUX1/AUX2
COMP PRE/POST
EFF1/EFF2 HI-G/F/Q EQ/COMP
MUTE MUTE
EFF1 EFF2
EFF EDIT
MAP DIRECT RCL
CLEAR
STORE RECALL SCENE MUTE OFF PLAY GREEN REC RED INPUT ORANGE CH STATUS CH STATUS/CH SEL
1/9/A 2/10/B 3/11/C 4/12/D 5/13/E 6/14/F 7/15/G 8/16/H
PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK
LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC 0 10 0 10
PHONES MON OUT TRIM
INPUT
6/14/F 7/15/G 5/13/E 4/12/D 3/11/C 2/10/B 1/9/A
INSERT UNBAL BAL
8/16/H
BAL INSERT UNBAL R L
PHONES MON OUT
MUTE OFF PLAY GREEN REC RED INPUT ORANGE CH STATUS CH STATUS/CH SEL
1 2 3 4 5 6 7 8
9
A
10
B
11
C
12
D
13
E
14
F
15
G
16
H
MASTER TRACK
INPUT
-60 -50 -40
-30
-20
-10
0
+6
-60 -50 -40
-30
-20
-10
0
+6
-60 -50 -40
-30
-20
-10
0
+6
-60 -50
-40
-30
-20
-10
0
+6
-60
-50 -40
-30
-20
-10
0
+6
- ∞ - ∞ - ∞
- ∞ - ∞
ACCESS
PHANTOM
CD PLAY
OPTICAL
1 3
7
6 5 4
Hint!
Hint!
6
1
3
Output sound from the sound source while adjusting the
[TRIM] 7/15/G and 8/16/H gain to an optimal level.
Tips: How to make a fader pair
You can pair two adjacent faders.
By pairing faders 15 and 16, for example, you can con-
trol both channels (15 and 16) simultaneously via a
single fader.
See page 146 for details about how to pair faders.
RECORD
1. Locate the time to start recording.
2. Press the [PLAY] key while the [RECORD] key is depressed
to start recording.
The [CH STATUS/CH SEL] key and [RECORD] key of ch15 and
16 lights up RED to indicate that the channels are recording.
By increasing the fader level of track 1, the user can record
to tracks 15 and 16 (overdubbing) while listening to the
playback sounds of track 1.
3. Press the [STOP] key to stop recording.
Set the ch15 and ch16 fader and master fader to “0”. 1 Connect the stereo sound source to record to [INPUT]
jacks 7/15/G and 8/16/H.
Press the [DIRECT-REC TRK] key (RED: Flashing).
Press the [CH STATUS/CH SEL] key for ch15 and ch16
(RED: Flashing).
Trk15 and 16 will go to the “ RDY (Ready)” mode. The other
tracks will be in the “ SAFE ” mode (Key: Light OFF).
2
3
4
5
6
7