Furuno COLOR VIDEO PLOTTER 1933C - Manual (Page 30)

1. OPERATIONAL OVERVIEW
1-16
1.8.2 Rearranging data boxes
You may select the location for data boxes as follows:
1. Using the trackball, place the cursor inside the data box you wish to move. As
the cursor enters the box it changes to a hand. Push the [ENTER] knob, and
the hand changes to a fist, meaning the box is correctly selected.
2. Use the trackball to move the data box to the location desired, then push the
[ENTER] knob.
1.8.3 Temporarily erasing a data box
If a data box is obscuring a desired object you may temporarily erase the box.
Use the trackball to place the cursor inside the data box you wish to erase, then
press the [CLEAR] key. To redisplay the box, press the D. BOX soft key twice to
display it.