Furuno COLOR VIDEO PLOTTER 1933C - Manual (Page 105)

3. PLOTTER OPERATION
3-21
3.6.4 Track plotting method and interval for own ship track
In drawing the own ship track, first the ship’s position fed from position-fixing
equipment is stored into the unit’s memory at an interval of time or distance. A
shorter interval provides for better reconstruction of the track, but the storage
time of the track is reduced. When the track memory becomes full, the oldest
track is erased to make room for the latest.
Track plotting method
Track may be plotted by time or distance. The default setting is “time.”
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
2. Use the trackball to select INTERVAL.
3. Press the EDIT soft key to display the plot window.
INTERVAL
▲
¤ TIME
¡ DISTANCE
▼
Interval window
4. Use the trackball to select TIME or DISTANCE as appropriate. Distance is
useful for conserving track memory, since no track is recorded when the boat
is stationary.
5. Press the ENTER soft key.
6. Press the [MENU] key to close the menu.
Track plotting interval
1. Press the [MENU] key followed by the CHART SETUP and TRACKS &
MARKS CONTROL soft keys to open the TRACK CONTROL menu.
2. Use the trackball to select TIME INTERVAL or DISTANCE INTERVAL as
appropriate.
3. Press the EDIT soft key to display the time or distance interval window,
depending on what you selected at step 2.
0 0m10s
(When selecting TIME INTERVAL.)
0 0.10nm
(When selecting DISTANCE INTERVAL.)
Setting range: 0 min 1 sec (continuous) - 99 min 59 sec
Default setting: 10 sec
Setting range: 0.01 nm (continuous) - 99.99 nm (km, sm)
Default setting: 0.1 nm
TIME INTERVAL
DISTANCE INTERVAL
Interval windows