Furuno COLOR VIDEO PLOTTER 1933C - Manual (Page 227)

7. MAINTENANCE, TROUBLESHOOTING
7-13
7.9 Error Messages
In addition to alarm messages your equipment also displays error messages.
Error messages
Error Message Meaning Remedy
Connection with the ETR was
cut. Network sounder disconnected. • Check that display unit
where the sounder is
connected is turned on.
• Check network sounder’s
cabling.
Connection with the RADAR
was cut. Radar disconnected. • Check that display unit
where the radar is
connected is turned on.
• Check antenna cable.
Low Voltage! Internal Battery Voltage of battery on circuit
board in display unit is low.
Have a qualified technician
replace the battery.
No bearing pulse detected. No bearing pulse from radar
antenna. Check antenna cable.
No GPS fix! GPS navigator is turned off or
no GPS position data. Check GPS navigator.
No heading pulse detected. No heading pulse Check heading sensor.