Furuno COLOR VIDEO PLOTTER 1933C - Manual (Page 196)

5. CUSTOMIZING YOUR UNIT
5-25
5.7.3 TD display setup
The TD SETUP menu sets which Loran C or Decca chain to use to display TD
position. (Connection of a Loran C or Decca navigator is not necessary to
display TD position.)
1. Press the [MENU] key.
2. Press the SYSTEM CONFIGURATION, NAV OPTION and TD SETUP soft
keys to display the TD SETUP menu.
TD
SETUP
EDIT
RETURN
LORAN-C
GRI 9940 11-27
U.S. WEST COAST
CORRECTION 1 +000.0
µ
s
CORRECTION 2 +000.0
µ
s
DECCA
CHAIN 01 R-G
S BALTIC
CORRECTION 1 +00.00 lane
CORRECTION 2 +00.00 lane
TD setup menu
Displaying Loran C TDs
1. Select GRI, then press the EDIT soft key to show the GRI & station pair
window.
GRI & STATION PAIR
U.S. WEST COAST
9940 11-27
▲
▼
▼
Loran GRI & station pair window
2. Adjust the trackball upward or downward to select GRI code.
3. Roll the trackball rightward to show the display below, to enable selection of
station pair.
GRI & STATION PAIR
U.S. WEST COAST
11-27 9940
▲
▼
▼
Loran C GRI & station pair window
4. Adjust the trackball vertically to select station pair.
5. Press the ENTER soft key to register your selection.