FUJITSU T5140 User Manual
FUJITSU Hardware
Table of contents
Document Outline
- SPARC® Enterprise T5140 and T5240 Servers Administration Guide
- Contents
- Figures
- Tables
- Preface
- Configuring the System Console
- Communicating With the System
- Accessing the Service Processor
- Using the Serial Management Port
- Activating the Network Management Port
- Accessing the System Console Through a Terminal Server
- Accessing the System Console Through a Tip Connection
- Modifying the /etc/remote File
- Accessing the System Console Through an Alphanumeric Terminal
- Accessing the System Console Through a Local Graphics Monitor
- Switching Between the Service Processor and the System Console
- ILOM -> Prompt
- OpenBoot ok Prompt
- System Console OpenBoot Configuration Variable Settings
- Managing RAS Features and System Firmware
- ILOM and the Service Processor
- OpenBoot Emergency Procedures
- Automatic System Recovery
- Unconfiguring and Reconfiguring Devices
- Displaying System Fault Information
- Storing FRU Information
- Multipathing Software
- Managing Disk Volumes
- OS Patch Requirements
- Disk Volumes
- RAID Technology
- Hardware Raid Operations
- Physical Disk Slot Numbers, Physical Device Names, and Logical Device Names for Non-RAID Disks
- To Create a Hardware Mirrored Volume
- To Create a Hardware Mirrored Volume of the Default Boot Device
- To Create a Hardware Striped Volume
- To Configure and Label a Hardware RAID Volume for Use in the Solaris Operating System
- To Delete a Hardware RAID Volume
- To Perform a Mirrored Disk Hot-Plug Operation
- To Perform a Nonmirrored Disk Hot-Plug Operation
- Logical Domains Software
- OpenBoot Configuration Variables
- Index