FUJITSU T5140 - Manual (Page 55)

Chapter 2 Managing RAS Features and System Firmware 33
▼ To Log In To ILOM
1. At the ILOM login prompt, enter the login name and press Return.
The default login name is root.
2. At the password prompt, enter the password and press Return to get to the ->
prompt.
Note – The default user is root and the password is changeme. For more
information, refer to the installation guide, the ILOM user’s guide, and the ILOM
supplement for your server.
Caution – In order to provide optimum system security, change the default system
password during initial setup.
Using the ILOM service processor, you can monitor the system, turn the Locator
LED on and off, or perform maintenance tasks on the ILOM service processor itself.
For more information, refer to the ILOM user’s guide and the ILOM supplement for
your server.
▼ To View System Fault Information
1. Log in to the ILOM service processor.
2. Use the following command to display a list of the faults currently on the
system.
show /SP/faultmgmt
Note – You do not need ILOM Administrator permissions to use this command.
Integrated Lights Out Manager 2.0
Please login: root
Please Enter password:
->