To delete a hardware raid volume – FUJITSU T5140 User Manual

Page 84

SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008

7. Exit the format utility.

The volume can now be used in the Solaris OS.

Note –

The logical device names might appear differently on your system,

depending on the number and type of add-on disk controllers installed.

▼

To Delete a Hardware RAID Volume

1. Verify which hard drive corresponds with which logical device name and

physical device name.

See

2. Determine the name of the RAID volume, type:

In this example, the RAID volume is c0t1d0.

Note –

The logical device names might appear differently on your system,

depending on the number and type of add-on disk controllers installed.

# raidctl

RAID Volume RAID RAID Disk

Volume Type Status Disk Status

------------------------------------------------------

c0t0d0 IM OK c0t0d0 OK

c0t1d0 OK