Fisher-Price SUPER TALK! 76960 - Manual (Page 22)

Assembly
22
Sport Bar
• Extend the canopy completely
around the sport bar, as shown.
26
Sport Bar
Canopy
Light Rack - Back Half
Tabs
Light Rack - Front Half
• Position the sport bar upright, as
shown.
• Fit and hold the front and back
halves of the light rack against
the sport bar. Make sure the two
light rack halves are aligned, and
that the screw holes in the light
rack are aligned with the screw
holes in the canopy and the
sport bar.
• Snap the tabs on the front half of
the light rack into the slots below
the lights on the rear half of the
light rack.
• Insert two #6 x 1 1 /
2
" screws
through the holes in the back of
the light rack, through the sport
bar, and into the front half of
the light rack.
• Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• Set the sport bar assembly aside
for assembly step 29.
27
#6 x 1 1 /
2
" Screw – 2
Shown Actual Size