Fisher-Price SUPER TALK! 76960 - Manual (Page 11)

Assembly
Do Not Omit Any Steps. Please set aside at least 60 minutes for assembly.
• Apply labels to the dashboard
plate, knob plate, and both sides
of the key chain as shown. Make
sure the areas where the labels
will be applied are clean and
dry. For best adhesion, avoid
applying labels more than once.
Dashboard Plate
Knob Plate
1
11
F
COOL
HEAT
15
13
13
Key Assembly
Knobs
19
• Snap the key assembly into the
dashboard plate.
• Insert the key chain end through
the key and then into the square
opening in the key chain.
• Snap the knobs into the knob
plate.
Note: Gently squeeze the tabs on
the knobs together before insert-
ing the knobs into the knob plate.
• Set the dashboard plate and
knob plate aside.
2
• Fit the phone holder into the
pocket in the dash, as shown.
• Slide the tab on the front of the
phone holder clip into the slot in
the bottom of the phone holder
to secure the phone holder to
the dash.
• Insert a #6 x 1'' screw through the
top of the phone holder and the
dash, and into the screw peg on
the back of the phone holder
clip, as shown.
Helpful Hint: Press on the screw
peg to align it with the screw
holes in the phone holder and
dash.
• Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
3
Square
Opening
Key
Key Chain
#6 x 1" Screw
Shown Actual Size
Dash
Phone Holder
Phone Clip Holder
Tab
18
COOL
HEAT
TM
Key Chain
20
21