Fisher-Price SUPER TALK! 76960 - Manual (Page 10)

®
®
• Squeeze the Lock-In TM connector
tabs on the charger connector
and plug it into the battery
connector.
• Plug the charger into a standard
120 volt wall outlet.
Note: If power flow to the wall
outlet is controlled by a switch,
make sure the switch is “ON”.
• Before first time use, charge the
6 volt batteries for at least 18
hours. Never charge the 6 volt
batteries longer than 30 hours.
Note: The 6 volt batteries must be
upright while charging.
2
3
Battery
Connector
Charger
Connector
Lock-In TM
Connector
Tabs
First-Time 6 Volt Battery Charging
10
• Insert a 30 amp fuse into each
6 volt battery.
Note: The top of the fuse will
not be flush with the top of the
6 volt battery when properly
installed.
• Stack one battery connector
on top of the other and snap
them together.
®
®
® IMPORTANT A 25 AMP FUSE MUST BE INSTALLED IN TOP OF BATTERY BEFORE TOY WILL RECHARGE OR OPERATE
IMPORTANT A 25 AMP FUSE MUST BE INSTALLED IN TOP OF BATTERY BEFORE TOY WILL RECHARGE OR OPERATE
®
®
1
30 Amp Fuse
Battery
Connectors
Charger