FUJITSU TX120 - Manual (Page 45)

TX120 Operating Manual 45
Starting up and operation Controls and displays
Controls
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button. When the system is operating, pressing
the On/Off button will switch off the system.
I
The On/Off button does not disconnect the server from the
mains. To disconnect from the mains completely, remove the
power plug(s).
NMI NMI button
I
Do not press! The NMI button may only be used by service
personnel.
RST Reset button
Pressing the reset button reboots the system.
ID ID button
When this button is pressed, the ID display (blue) on the front of the
server lights up.