Features, 2 features – FUJITSU TX120 User Manual
Page 10
10
Operating Manual
TX120
Features
Introduction
1.2
Features
System board
The features of the system board are described in the technical manual for the
system board D2550 for the hardware and in the “BIOS Setup” for the firmware
(see
Hard disk drives
The server is equipped with a drive bay in which up to 2 SAS HDD modules can
be inserted. Each HDD module can accommodate a SAS hard disk drive with a
2.5 inch format. The module is connected to the SAS backplane without cables
via the SAS interface. This allows hard disk drive modules to be easily plugged
in or pulled out.
The hard disk subsystem is designed for SAS, each with one channel for each
hard disk drive.
If the server has the corresponding RAID configuration, HDD modules can also
be exchanged during operation.
A hard disk drive extension box can be installed optionally (with a maximum of
three HDD modules).
Onboard SAS controller with Integrated Mirroring Enhanced functionality
An onboard SAS controller with "Integrated Mirroring Enhanced" (IME) function-
ality is fitted to operate the six hard drives. IME also provides RAID functionality
for configuring the internal hard drives (RAID level 0, 1, 1E).
I
A separate utility is available to the controller for IME configuration. For
further information, refer to the “Integrated Mirroring User’s Guide” on the
ServerBooks
DVD (select “Controllers” from the menu).