System specifications, E1200i ac chassis physical design, E1200i ac system power requirements – Force10 Networks Force10 TeraScale E-Series E1200i User Manual
Page 91: System, Appendix d, Refer to, Appendix d system specifications

Installing and Maintaining the E1200i System
91
This appendix contains two major sections:
•
E1200i AC Chassis Physical Design
•
E1200i DC Chassis Physical Design
•
•
E1200i AC Chassis Physical Design
E1200i AC System Power Requirements
Appendix D
System Specifications
Parameter
Specifications
Height
42 inches (106.68 cm)
Width
17.40 inches (44.20 cm)
Depth (without cable management system)
22.25 inches (56.51 cm)
Chassis weight with factory-installed components
(backplane and air filter)
139 pounds (approx.) (63.05kg)
Weight fully loaded (backplane, air filter, 2 fan trays, 10
SFMs, RPMs, and 14 line cards)
394 pounds (approx.) (178.7 kg)
Mounting
Attached rack mount brackets are factory set for front
mounting in a standard 19-inch rack.
Mounting brackets are adjustable for center and rear
mounting.
Optional brackets are available for front or center
mounting in a 23-inch rack or cabinet.
Rack clearance required
Front: 18 inches
Rear: 20 inches
Thermal Output
Maximum for fully loaded chassis
7,784W (26,578BTU/HR)
Minimum for chassis with one 48-port 1GE line card
1,450W (4,951 BTU/HR)
Parameter
Specifications
Maximum Power Consumption
7,784W
Input Voltage Range
200-240 VAC 50/60 Hz