Force10 Networks Force10 TeraScale E-Series E1200i User Manual
Page 85

Installing and Maintaining the E1200i System
85
Refer to the
FTOS Command Line Interface Reference
for CLI configuration procedures and configuration
instructions.
10.
reload
Reload software.
The autoboot program initializes and displays self-test results on the console
screen.
NOTE: Do not press break control sequence at any time during the boot/reboot
process. Doing so causes the boot process to terminate.
11.
Force10>
When the reboot completes, the CLI defaults to the EXEC mode.
Step
Command
Task (continued)