Force10 Networks Force10 TeraScale E-Series E1200i - Manual (Page 33)

Installing and Maintaining the E1200i System 33
To install fan trays:
Table 3 is an illustration of the fan tray safety labels:
Step Task
1. Unpack the fan tray.
2. Prior to inserting a fan tray, fully turn its screw latch counter-clockwise (with flathead screwdriver) until
the fan tray latching mechanism fully retracts into the fan tray (see
Figure 10 ).
3. Grip the fan tray handle. Slide the connector end of each fan tray into the slot until it stops and the
handle end is flush with the chassis rear.
4. Secure the fan trays into place by turning the screw latch clockwise.
Table 3 Fan Tray Safety Labels
Label Location
Fan tray faceplate FN00051A