Force10 Networks Force10 TeraScale E-Series E1200i - Manual (Page 12)

12 About This Guide
See Chapter 3, Site Preparation for more cautions.
Related Publications
For more information about the E1200i system, refer to the following documents:
• FTOS Configuration Guide for the E-Series
• FTOS Command Reference for the E-Series
• E-Series Network Operations Guide
• Release Notes for the E-Series and FTOS
Danger: The installation of this equipment shall be performed by trained and qualified
personnel only. Read this guide before installing and powering up this equipment. This
equipment contains two power cords. Disconnect both power cords before servicing.
Danger: This equipment contains optical transceivers, which comply with the limits of
Class 1 laser radiation.
Visible and invisible laser radiation may be emitted from the aperture of the optical transceiver
ports when no cable is connected. Avoid exposure to laser radiation and do not stare into open
apertures.
Caution: Wear grounding wrist straps when handling this equipment to avoid ESD damage.
Danger: Leakage Current (High Touch Current) in AC-powered systems: AC power cords are
secured to the power inlet using the provided brackets. The power cord plugs must be secured to
the building outlets by the qualified chassis installer or a qualified electrician.