FUJITSU 10 ppm User Manual
Page 96
User’s Manual
5-3
MAINTENANCE
Important:
Whenever you replace the toner bottle, clean the corona wire and the
precharger wire to prevent a degradation in print quality.
You can continue to print after the toner low status if the print quality is
still satisfactory. However, you must at least prepare a new toner bottle.
To replace the toner bottle, follow these steps:
1. Open the upper door.
2. Tap the toner bottle. Tap
the toner case to drop any
remaining toner from toner
bottle into print unit. This
avoids the remaining toner
from being spilt inside the
printer during replacement.
3. Unlock and remove the old
toner bottle. Pull the top of
the toner bottle toward you to
swing bottle from the upright
position to the removable
position. Gently remove the
bottle. If necessary, clean
toner around the toner
hopper entry of the print
unit.
Notice:
Be careful not to allow dust or foreign matter into the toner hopper.
Periodic Routine Maintenance
✍
☞